VIGISPACE®
DUAL-VENT® + VIGISPACE®
When fitted the gas detection and the opening of the DUAL-VENT® will be done in the lateral opening, with minimal rainentering inside the container.
In the event of an explosion, the vent incorporated in the DUAL-VENT® will burst open normally and the flame will be deflected upwards by our VIGISPACE® deflector.
VIGIFOLD Deflector
If it is not possible to position the explosion vents on top of the BESS, the optimal solution is to use a deflector mounted on the sides of the enclosure to minimize damage to the surrounding environment in the event of an explosion.
The vent panel is installed first, followed by the deflector. This setup ensures that the vent panel remains contained, while the fireball resulting from the explosion is directed upwards.
With the VIGIFOLD, we provide an additional function. Transportation is subject to numerous regulations, particularly regarding equipment size. By using the foldable VIGIFOLD deflector, you can install the device directly at your factory without worrying about oversizing your equipment.
